SHIPHORO · HOME & LEISURE SAFETY
Recreational Equipment Safety Guide
Enjoy Every Activity with Confidence.
Practical safety guidance for using, positioning, maintaining, and caring for recreational and leisure equipment in everyday home environments.
A SAFER WAY TO ENJOY EVERYDAY LEISURE
Comfort and Safety Should Always Go Together.
Recreational equipment can make everyday living more enjoyable, whether it is used for relaxation, outdoor activities, family gatherings, or personal leisure. However, proper setup and responsible use are essential to maintaining a safe environment.
Different products have different construction methods, operating requirements, weight limits, and intended uses. A piece of leisure furniture, an adjustable seating unit, an outdoor accessory, and a recreational storage product should not automatically be used in the same way.
This guide provides general safety recommendations for recreational and leisure equipment. Always read and follow the instructions, warnings, and product-specific safety information supplied with your individual item. If the product instructions differ from general guidance on this page, follow the product-specific instructions.
IMPORTANT SAFETY NOTICE
Use Equipment Only for Its Intended Purpose.
Never exceed the stated weight capacity, modify structural components, remove safety features, or use equipment in a way that is not supported by its design. Stop using any product that shows signs of structural damage, unusual movement, or unsafe operation.
THE FIRST SAFETY CHECK
Five Things to Check Before Every Use.
01. Physical Condition
Check for cracks, deformation, loose components, damaged surfaces, and missing fittings.
02. Stability and Position
Make sure the equipment is correctly positioned on a suitable, stable surface.
03. Weight and Capacity
Confirm that the intended use and load remain within the product's stated limits.
04. Surrounding Environment
Keep the surrounding area clear of obstacles, moisture hazards, and unnecessary clutter.
05. Operating Instructions
Understand the correct operation and safety features before using the equipment.
01 · PRE-USE INSPECTION
Start with a Careful Equipment Inspection.
A quick inspection before use can help identify problems that may affect stability, comfort, or safe operation. Pay particular attention to structural connections and components that experience repeated movement or pressure.
Inspect the Main Structure
Look for cracks, bent frames, damaged supports, unstable joints, and visible signs of wear. Do not use equipment with structural damage or components that appear unable to support normal use.
Check Fasteners and Connections
Inspect accessible screws, bolts, brackets, hinges, and locking components. If a connection appears loose, follow the product instructions for inspection and adjustment before using the item.
Test Moving Components
Where applicable, check that hinges, sliding parts, adjustable sections, and locking mechanisms move smoothly and engage correctly. Never force a component that feels stuck or misaligned.
Look for Surface Damage
Check for sharp edges, splintering, peeling finishes, exposed fasteners, and other conditions that could cause injury or further damage during use.
02 · CORRECT SETUP
Create a Safe Environment Before Operating.
The way equipment is positioned can affect its stability and usability. Choose a location that matches the product's intended environment and provides sufficient room for normal operation.
Select a Suitable Surface
Place equipment on a stable, level surface appropriate for its design. Avoid slippery, uneven, or unstable areas that may cause unwanted movement.
Maintain Enough Clearance
Leave adequate space around moving parts and areas used for sitting, standing, or accessing the equipment. Keep walkways and emergency access routes unobstructed.
Follow Installation Instructions
Complete assembly using the specified parts, tools, and installation sequence. Do not substitute hardware or remove designated safety components without manufacturer approval.
Check Environmental Conditions
Make sure the location is suitable for the equipment. Consider moisture, heat, direct sunlight, wind, ventilation, and other conditions identified in the product instructions.
03 · PRODUCT-SPECIFIC SAFETY
Safe Use Across Different Leisure Products.
Different types of recreational and leisure products require different precautions. The following guidance covers common equipment and furniture applications. Always refer to the instructions for the particular product you own.
04 · LOAD AND STABILITY
Respect Weight Limits and Structural Capacity.
Every product is designed for specific uses and loading conditions. Exceeding the stated capacity or applying weight in an unintended way may cause instability, structural damage, or injury.
Follow the Stated Weight Capacity
Check the product information and instructions for any applicable load limits. Never assume that similar-looking products have identical weight capacities.
Distribute Weight Appropriately
Avoid placing concentrated loads on edges, unsupported panels, or components not designed to carry weight. Use the intended load-bearing surfaces.
Avoid Improvised Extensions
Do not stack furniture, add unauthorized supports, or attach incompatible components in an attempt to increase the equipment's capacity or height.
Check Stability During Use
If the product begins to wobble, shift, tilt, or make unusual noises, stop using it and inspect the relevant components before considering further use.
05 · FAMILY AND CHILD SAFETY
Create a Safer Environment for Everyone.
A home or recreational area may be used by people of different ages and abilities. Furniture and equipment should be positioned and operated with the needs of everyone in the household in mind.
Keep Children Away from Moving Parts
Folding joints, reclining mechanisms, sliding sections, and adjustable fittings may create pinch points. Keep children's hands away from these areas during operation and assembly.
Use Age-Appropriate Products
Do not allow children to use equipment unless the product is specifically suitable for their age, size, and intended activity. Follow all age-related instructions and warnings.
Prevent Climbing and Tipping Hazards
Do not allow children to climb on cabinets, shelving units, chairs, or other furniture not designed for climbing. Secure applicable tall furniture with suitable anti-tip hardware.
Keep Small Components Out of Reach
During assembly and maintenance, keep screws, bolts, small accessories, and packaging materials away from young children and pets.
06 · OUTDOOR AND RECREATIONAL ENVIRONMENTS
Additional Precautions for Outdoor Use.
Outdoor equipment may be affected by weather and changing surface conditions. Before use, make sure the environment is appropriate for the product and that no surrounding condition creates an avoidable hazard.
Sunlight and Heat
Some materials and surfaces can become hot or deteriorate after prolonged sunlight exposure. Check the product's outdoor suitability and avoid direct contact with surfaces that have become excessively hot.
Rain and Wet Surfaces
Wet floors may increase the risk of slipping. Check the surface before using equipment, remove standing water where appropriate, and allow moisture-sensitive items to dry.
Strong Wind
Lightweight equipment, furniture, and loose accessories may shift or become airborne. Move or store movable items when strong winds are expected. Never rely on improvised attachments to secure objects.
Uneven Outdoor Ground
Avoid positioning equipment on unstable paving, loose gravel, soft ground, or surfaces that cannot provide adequate support. Follow the product's placement requirements.
07 · CLEANING AND MAINTENANCE
Maintain Equipment to Support Safe Everyday Use.
Regular care helps preserve the condition of recreational equipment and makes it easier to identify potential problems. Cleaning and maintenance methods should always be appropriate for the material and product design.
Clean According to Material Requirements
Use suitable cleaning products and methods for the surface. Avoid abrasive materials, excessive moisture, and harsh chemicals unless expressly permitted by the product care instructions.
Inspect Connections Periodically
Check accessible fasteners, joints, hinges, and support components for signs of loosening or deterioration. Adjust or replace components only as directed by the product instructions.
Keep Moving Mechanisms Clean
Remove dust and debris from accessible moving areas where appropriate. Do not apply lubricants unless they are compatible with the product and recommended in its instructions.
Store Equipment Properly
When not in use, keep equipment in an appropriate storage environment. Protect moisture-sensitive components and keep stored items away from excessive heat, humidity, and unnecessary pressure.
08 · WHEN SOMETHING GOES WRONG
Recognize Warning Signs and Stop When Necessary.
Do not continue using equipment simply because it appears to remain functional. Certain warning signs indicate that further use may be unsafe.
Unusual Noise or Movement
Stop operation if the equipment produces unexpected cracking, grinding, or repeated clicking sounds, or begins to move in an unusual way. Inspect the relevant components before further use.
Cracks or Structural Deformation
Do not use equipment with cracked frames, bent support structures, broken joints, or other damage that could affect its strength or stability.
Malfunctioning Locks or Controls
Stop using adjustable equipment if its locking or adjustment mechanisms do not engage or operate as intended. Do not bypass safety features.
Missing or Damaged Components
Do not operate equipment if a required structural or safety component is missing, damaged, or incorrectly installed.
Important: Do not attempt unauthorized repairs, welding, drilling, structural modifications, or replacement with incompatible components. Contact the SHIPHORO customer service team when product-specific assistance is needed.
09 · PRODUCT CONCERNS AND SUPPORT
How to Report a Safety or Product Issue.
If you notice a product defect, missing safety component, unusual operation, or condition that may affect safe use, contact us so the matter can be reviewed.
Step 1 · Stop Using the Affected Equipment
Discontinue use if the issue could affect structural integrity, stability, or safe operation. Keep other people away from the affected item where necessary.
Step 2 · Record the Relevant Details
Identify the product, describe the problem, and note when the issue was first observed. Include the relevant component or assembly step if applicable.
Step 3 · Provide Supporting Photographs
Where possible, provide clear photographs showing the affected area, the overall product, and any relevant labels or component identification.
Step 4 · Follow the Recommended Next Steps
Our team can review the information and advise on the appropriate way to address the reported issue. Do not resume use until the safety concern has been appropriately resolved.
10 · EVERYDAY SAFETY HABITS
Small Habits That Make a Difference.
Safe equipment use is not limited to the first installation. Consistent everyday habits help maintain a more organized environment and reduce avoidable risks.
Return Equipment to Its Proper Position
After use, return adjustable or foldable products to their recommended resting or storage position where applicable.
Keep the Area Free from Clutter
Remove unnecessary objects from the surrounding area to reduce the risk of trips, falls, or accidental contact with equipment.
Use Products Only as Intended
Avoid improvised uses, excessive force, or activities beyond the product's stated design and operating requirements.
Keep Instructions Available
Retain the product's assembly and safety information for future reference, particularly when maintenance or adjustments are required.
SAFETY QUESTIONS
Frequently Asked Questions.
Can I use equipment if one of its components is slightly damaged?
It depends on the nature of the damage. If the affected component contributes to structural support, stability, locking, or safe operation, stop using the product until the issue has been assessed and appropriately resolved.
Can I replace a missing screw with one that looks similar?
Do not assume that similar-looking hardware is interchangeable. Thread type, length, diameter, and material may affect the connection. Use the specified replacement component or contact customer support for guidance.
How often should recreational equipment be inspected?
Inspect equipment before use and conduct more detailed checks at intervals appropriate to its frequency of use, environment, and product instructions. Frequently used or adjustable products may require more regular attention.
Can children use recreational furniture without supervision?
Only if the product is specifically suitable for their age and use, and the relevant safety instructions permit it. Products with moving parts, tipping hazards, or other risks require appropriate adult supervision.
What should I do if equipment starts making unusual noises?
Stop using it and inspect the accessible connections and moving components. If the cause is unclear or the noise may indicate structural damage, contact customer support before using it again.
Can I modify equipment to make it more convenient?
Do not make unauthorized structural modifications or remove designated safety features. Changes may affect stability and safe operation. Follow the manufacturer's instructions for approved adjustments.
What if I cannot find the product's safety instructions?
Contact the SHIPHORO customer service team with the product name and relevant order information. We can review your inquiry and provide assistance where product information is available.
OUR APPROACH TO RESPONSIBLE USE
Thoughtful Use Creates Better Everyday Experiences.
At SHIPHORO, we believe that comfortable living includes using household and leisure products responsibly. Good equipment care begins with understanding how a product is designed to work and recognizing when it needs attention.
By following product instructions, checking equipment regularly, and responding promptly to potential safety concerns, you can help create a more comfortable and responsible environment for everyday activities.
SAFETY STARTS WITH EVERYDAY CHOICES
Use with Care. Enjoy with Confidence.
A little attention to setup, operation, and maintenance can make a meaningful difference in how you enjoy your home and leisure spaces.
SHIPHORO · Thoughtful Living, Comfortable Spaces.
Questions About Product Safety or Use?
If you have questions about product instructions, operating requirements, equipment components, or a potential safety concern, contact the SHIPHORO customer service team.
BRAND
SHIPHORO
BUSINESS ADDRESS
251-1 Kamishioda, Narumicho, Lions Place Narumi Tower 1508, Midori-ku, Nagoya, Aichi 4580835, Japan
PHONE
+81 (709) 295 32 23
CUSTOMER SERVICE HOURS
Monday–Friday, 9:00 AM–5:00 PM (Eastern Time)
SHIPHORO
Thoughtful Living, Comfortable Spaces.
Safety, Comfort, and Everyday Confidence.